Waterproofing is not a product – it is a system

If waterproofing failures were caused by poor materials alone, the problem would have been solved long ago. Yet leaks, seepage, and dampness continue to plague even “well-built” structures. The reason is simple and well known to experienced engineers: The devil is in the detailing. True waterproofing success lies not in isolated products, but in integrated systems, correct sequencing, and execution discipline. This is where Assess Build Chem Private Limited sets itself apart.

From materials to methodology – waterproofing done right
Assess Build Chem’s core competency lies in engineering waterproofing as a complete performance system, not merely supplying coatings or admixtures. We formulate, manufacture, and assemble end-to-end waterproofing solutions that enhance service life, durability, and performance of structures across residential, commercial, infrastructure, and heritage segments. Our philosophy is simple: Correct Materials + Correct Methodology + Trained Manpower + Correct Machinery. By working closely with consultants, specifiers, and applicators, we ensure that waterproofing design intent is translated faithfully on site resulting in defect-free, durable systems rather than short-term fixes.

The assess build chem 5-step waterproofing methodology
Every successful waterproofing application follows a logical, engineered sequence. Our proven 5-Step Metho-dology is adaptable to virtually any structure or exposure condition.
Concrete Improvement – Build the Right Substrate: Waterproofing can only perform as well as the surface beneath it. This stage focuses on restoration and enhancement of concrete quality, using:

• SS – ConProof Range of hydrophobic and crystalline integral waterproofing admixtures for new concrete
• SS – LeakProof & SS – PolyBond polymer modifiers for mortars
• SS – StructoCrete & SS – StructoRep polymer-modified repair mortars for surface rehabilitation

The objective: create a dense, sound, and compatible substrate ready to receive waterproofing.
Filling Cracks & Voids – Stop Water Pathways at the Source: Unsealed cracks and voids are primary routes for water ingress. Depending on structural condition and exposure, we deploy:

• SS – WaterStop FC cementitious grouts
• SS – CrackSeal EP epoxy injection systems
• International polyurethane and silicate grouts from F. Willich and Rascor International GmbH
• SS – WaterStop DPC Chemical, especially suited for heritage and masonry structures

This step ensures that active and dormant leak paths are permanently addressed.

Joints & Penetrations – Where Most Failures Begin: Corners, construction joints, expansion joints, and service penetrations are statistically the first points of failure in any structure. Our joint waterproofing systems include:

• SS – JointSeal FT – Flashing Tapes for construction and corner joints
• SS – JointSeal T1 – Tapes for expansion joints
• SS – JointSeal FT Membrane – Flashing Membranes for pipe penetrations
• SS – JointSeal SW – Swellable Waterbars for active joint protection

Waterproof Barriers – The Primary Line of Defense: Once the substrate, cracks, and joints are properly prepared, the waterproofing barrier is applied using systems selected for exposure, movement, and durability requirements:

• SS – CrystoSeal Range (slurry-applied crystalline systems)
• SS – SuperSeal Flex (flexible cementitious coatings)
• Ready-to-use protective membranes:

-SS – FlexProof AC (Acrylic)
-SS-FlexProof PU/PU(B) (Polyurethane)

Drainage & Protection – Making Waterproofing Last: Effective water-proofing must allow water to drain safely away while protecting the system from mechanical damage. This final layer ensures long-term performance under real service conditions. This stage includes:

• Modified screeds and mortars using SS – ConProof, SS – PlastProof IL
• SS–HydroNil PM–a superhydrophobic, breathable, ready-to-use mortar
• Fully waterproof tile adhesives from the SS – TileFix Range

At Assess Build Chem, we do not sell waterproofing products we deliver engineered waterproofing outcomes. When detailing, compatibility, and execution are addressed as a single system, waterproofing works every time.

Assess Build Chem Pvt. Ltd.
302 – 304 Vardhaman Chambers,
A – Wing, Sector 17, Vashi,
Navi Mumbai – 400 703, Maharashtra
Tel : +91 22 4127 2323
Email : info@ssbuildchem.com
Web : www.ssbuildchem.com