November 2, 2024 12:12 am

UT Lamination Private Limited

Excelling in MIG Welding

MIG Welding is prevalent and very popular method of welding used in the industry.
While welders have become adept at using it, here’s a few technical tips to increase the efficiency and overall output while using MIG welding.

The best way of doing better at MIG welding is to run beads. And that can be done with a Tee joint. A simple tee joint allows you to run the bead straight by following the seam while ensuring each bead overlaps the previous one, halfway.

Some types of Tees:
SHORT CIRCUIT MIG UPHILL TEE

This type of tee needs gun manipulation for penetration and to avoid excessive convexity. In short, if you don’t do something to let the bead lay down flat, it may hump. Well, this is just a characte-ristic of this type of tee. But then, this happens because of the gravity.

You can either make use of an upside-down V technique or simply use triangles for metal spread out as welding without torch movement generally results in crowned bead.

OVERHEAD TEE JOINT DRILL
This should be done by using similar settings that are used for flat or horizontal positions. Just that don’t set the machine colder as that can cause puddle. Instead, use a hot setting as that usually works better.

SHORT CIRCUIT MIG 3G PLATE TEST
Typically, a short circuit MIG weld test is 3/8” thick plate test done with 30-37.5-degree bevels. Here, the roots pass is welded downhill, whereas the fill and cap are done uphill. As for the number of weld passes, it depends on the individual welder.

MIG WELDING THIN WALL TUBING
If you need to fabricate things from thin wall tubing, MIG welding is the ultimate. The best practices for the same are as follows;

  • Ensure the ground is good enough;
  • Keep the stickout short;
  • Watch out the gun angle;

UT Lamination has a wide range of MIG, TIG & Plasma Cutting Welding Machines, serving every kind of welding needs and giving you the best output. Two of our stand-out models are:

UT CUT-100

  • Adjustable cutting current, satisfy different requirement of material
  • Can be used to cut carbon steel, stainless steel, galvanized steel, copper, aluminum etc
  • Built-in default phase protection, over and low voltage protection, overheat protection
  • Max cutting thickness is 32mm & fine cutting thickness is 25mm

UT TIG-400

  • IGBT Modular
  • Diode Modular
  • Input capacitor modular
  • Bridge rectifier modular
  • HF start facility
  • ARC welding 24hrs continues with 5mm electrode

UT Lamination is a member of a group company that manufactures and supplies Thyristor welding machines as a manufacturing partner to leading MNCs in India for the 40 years. Presently, the company is manufacturing inverter welding machines in a separate factory under its own UT brand, manufacturing in India and serving to customers all around the world.

The company develops, produces and markets welding machines and solutions through a large network of dealers, whereas their welding specialists and service partners constantly render excellent customer service.

Our entire range of welding machines are manufactured keeping in mind what the end user, the welding personnel / on-site technician wants or find useful. Second major focus is on energy consumption. As a responsibility of the industry as a whole, saving energy should be our goal.

Our energy efficient welding machines consume low power without compromising on the final output.
We Infuse technology with Innovation to manufacture welding machine, that includes:

Advanced Modular Machine, drastically improves the life of machine, reliability and maintainability. VRD facility saves workmen from electrical shock and also further saves energy. Excellent dynamic properties make extremely easy for welders. The MMA welding machines we make be used for all types of electrodes. This can use any type and size of electrode for MMA process.

UT Lamination caters to Manufacturing, aerospace, steel structures, electricity, construction, shipbuilding, chemical construction, bridge building, vehicle manufacturing, boilers, pipeline, military, to marine engineering, and more industries across India and abroad.

When in the welding business, it is our duty to educate the customers at large with as much informative content as possible, which is what we at UT Lamination do through different media, including Digital.
When choosing a welding machine always go with the best in the business. No compromise on
Quality, Performance, and Precision. Choose a brand that gives you all of these.

The right choice of welding machine can make all the difference in the final output.

UT Lamination Private Limited
Web : www.utlaminationwelding.com

Share this Article

Follow us

Subscribe